2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 718
WARNING
High voltage:
Death or severe injuries due to high voltage or high current.
- Start engine only if all the bar ignition modules have been installed and connected.
NOTE:
Sensitive electronics.
Risk of irreparable damage to electronic components.
- DO NOT perform electrical tests.
- DO NOT connect external power sources.
- Ground supply Check.
Diagnostic conditions
- Period since engine was started > 2 Second(s)
- Engine temperature > -30 锟斤拷C (锟斤拷F)
- none of the following faults stored : P0353, P2306, P2307
Possible fault causes
- only P2308:
- Bar ignition module Cylinder 3 Faulty
- P2308 + P0353 or P2306 or P2307:
- Loose contact or corrosion on connectors or lines
- Short circuit to B+ or open circuit in lines (Ground supply)
- Short circuit to ground or open circuit in lines (Power supply)
- Short circuit to B+/ground or open circuit in the line (Activation)
- Bar ignition module Cylinder 3 Faulty
P2309
P2309
Diagnosis information - Control unit DME (DFI)
Bar ignition module Cylinder 4
WARNING
High voltage:
Death or severe injuries due to high voltage or high current.
- Start engine only if all the bar ignition modules have been installed and connected.
NOTE:
Sensitive electronics.
Risk of irreparable damage to electronic components.
- DO NOT perform electrical tests.
- DO NOT connect external power sources.
- Ground supply Check.
Diagnostic conditions
- Period since engine was started > 2 Second(s)
- Engine temperature > -30 锟斤拷C (锟斤拷F)
Possible fault causes
- Loose contact or corrosion on connectors or lines
- Short circuit to B+ or open circuit in lines (Ground supply)
- Short circuit to ground or open circuit in lines (Power supply)
- Short circuit to B+/ground or open circuit in the line (Activation)
- Bar ignition module Cylinder 4 Faulty
P2310
P2310
Diagnosis information - Control unit DME (DFI)
Bar ignition module Cylinder 4
没有评论:
发表评论