2019年11月24日星期日

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 713

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 713



Diagnostic conditions



- Ignition on > 5 Second(s)



Possible fault causes



- Loose contact or corrosion on connectors or lines



- Short circuit to B+/ground/between lines or open circuit in the lines



- Quantity control valve Faulty (in Fuel high-pressure pump)



P2297



P2297



Diagnosis information - Control unit DME (DFI)



Oxygen sensor in front of catalytic converter Bank 1, Dynamism



NOTE:



Separated plug connection = open reference-air duct.



Damage to oxygen sensor.



- DO NOT use spray, grease, fluid or similar products on the oxygen sensor plug connections.



INFORMATION



- Do not interchange the oxygen sensor in front of the catalytic converter with the sensor behind the catalytic converter as this will result in



implausible fault entries.



- The plugs themselves are coded and cannot be interchanged.



Diagnostic conditions



- Driving, at:



- Exhaust gas temperature > 200 锟斤拷C (锟斤拷F)



- Overrun phase(s) > 8 Second(s)



Possible fault causes



- Unintentional fuel supply, e.g. due to:



- dripping fuel injector



- high fuel content in engine oil



- large quantity of evaporating engine oil



- Short circuit to B+/ground/between lines or open circuit in the lines



- Oxygen sensor in front of catalytic converter Bank 1 Faulty (aged)



P2298



P2298



Diagnosis information - Control unit DME (DFI)



Oxygen sensor in front of catalytic converter Bank 2, Dynamism



NOTE:



Separated plug connection = open reference-air duct.



Damage to oxygen sensor.



- DO NOT use spray, grease, fluid or similar products on the oxygen sensor plug connections.



INFORMATION



- Do not interchange the oxygen sensor in front of the catalytic converter with the sensor behind the catalytic converter as this will result in



implausible fault entries.



- The plugs themselves are coded and cannot be interchanged.



Diagnostic conditions



- Driving, at:



- Exhaust gas temperature > 200 锟斤拷C (锟斤拷F)



- Overrun phase(s) > 8 Second(s)



Possible fault causes



- Unintentional fuel supply, e.g. due to:



- dripping fuel injector



- high fuel content in engine oil



- large quantity of evaporating engine oil

没有评论:

发表评论