Wheels - Difficult to Remove
No: 10/01/01/NAS
Ref:
Issue: 1
Date: 11/09/01
Alloy Wheel-center Lubrication
AFFECTED VEHICLE RANGE:
All Land Rover products with alloy wheels
SITUATION:
ALLOY WHEELS DIFFICULT TO REMOVE
Corrosion between the wheel hub and the alloy wheel center mounting surfaces can result in a condition that makes the wheel difficult to remove for
service or tire repair. An anti-seize grease has been progressively introduced into production to help resolve this condition.
RESOLUTION:
LUBRICATE WHEEL-CENTERS
At maintenance intervals or whenever a wheel is removed for repairs, lubricate the wheel-center with a zinc-based anti-seize compound. The
anti-seize grease should be used for all models on the wheel mounting surfaces when refitting alloy road wheels.
PARTS INFORMATION
WARRANTY CLAIMS:
24
Normal warranty policy and procedures apply. Material allowance is included in applicable labor operation.
REPAIR PROCEDURE
APPLY ANTI-SEIZE COMPOUND
CAUTION:
Only the zinc based anti-seize compounds specified for use with aluminum are to be used for this maintenance procedure. Apply to the
wheel mounting surfaces only. Care must be taken to avoid contact with brake discs and pads.
1. When wheels are removed for maintenance inspections, apply a thin coat of anti-seize compound to the mating surfaces of the wheel and the
没有评论:
发表评论